Mitsubishi-electric MSH-07NV Bedienungsanleitung PDF herunterladen (Seite 61)

OPERATING PROCEDURE PHOTOS

3. Removing the electrical box

(1) Remove the front panel. (Refer to 1)

(2) Remove the electrical cover.

(3) Disconnect the connector of the indoor coil thermistor.

(4) Disconnect the motor connector (CN211 and CN121) and

the vane motor connector (CN151) on the electronic con-

trol P.C. board.

(5) Unhook the catches (both upper and lower), remove the

electrical box.

4. Removing the vane motor

(1) Remove the front panel.

(2) Remove the screw of the vane motor, disconnect the con-

nector.

(3) Remove the vane motor.

5. Removing the line flow fan and the indoor fan motor

(1) Remove the front panel. (Refer to 1)

(2) Disconnect the connector from the vane motor.

(3) Pull out the drain hose from the nozzle assembly, remove

the nozzle assembly.

(4) Lifting the left side of the heat exchanger, remove the elec-

trical box.

(5) Remove the fixture of the fan motor.

(6) Remove the hexagon socket set screws.

(7) Remove the line flow fan and the fan motor.

Photo 4

Photo 5

Drain hose

Vane motor screw

Vane motor

Fan motor

catches

Fan motor

fixture

Indoor coil

termistor

Catch

Photo 3

OB207t-3qxp 25/9/97 9:02 PM Page 61

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

Keine Kommentare

Mitsubishi-electric MSH-07NV Bedienungsanleitung Seite 61